First of all Happy Almost Valentines Day! That is why this particular post is obnoxiously pink and red :). I hope you all have a wonderful day tomorrow!
Much like the last tutorial that I posted, adding a simple fabric folding technique can add a lot to any project. This tutorial covers how to make some of my personal favorite handmade effects, knife and box pleats. These particular methods are beautiful on clothes or decorative pieces. It can so quickly take a bland project and turn it into something special and unique.
We are starting with knife pleats because these are the basis of the other technique. Much like ruffles, they are not too difficult to create. Knife pleats are perfect for making A-line skirts, or a detail on a shirt.
What you’ll need:
- Straight Pins
- Sewing machine or needle and thread
- Measuring implement
The most difficult part of making a knife of box pleat is the math. When you pleat or tuck fabric the length quickly diminishes. Because of this, if you need a particular length, like if it has to go around a pillow or if you are pleating in a skirt you must do the math. If you’re like me though you HATE math. I really would almost prefer winging it and hoping for the best, knowing I may have to redo something. That thought though has been mainly drilled out of me by parents/teachers/the fact that I also hate redoing things… So instead we shall do math. If you are doing a full 1″ knife pleat that means that the length of the pleat is 1″ and the tuck inward in also 1″ and the fabric under the pleat is 1″. This means that each pleat will diminish the length of the fabric by three inches. So if you need a skirt to have a circumference of 34″ (including seam allowances) then you would need 3 times that amount of fabric, 102″ (2.9 yards), of fabric.
So the equation would be:
(The amount of fabric you need to end up with) x (The full amount of fabric used by the pleat ie the amount of the pleat x3)
In the example of the 1/2″ pleat the math would be:
34 x 1.5
God, I hope that makes sense… Please let me know if that only makes sense to me. Since we’ve gotten past the math (in theory) now comes the fun part. To make a knife pleat first begin by pressing back 1″ worth of fabric under. Pin this into place.
From the edge of this pleat measure out one inch, then tuck under one additional inch and pin. Continue this process until you have completed the length of fabric. See! I wasn’t kidding when I said the math was the hardest part! When you’re done, simply sew the pleats down with a straight stitch across the pleats and you are done!
Box pleats are very similar to knife pleats. The only difference is after you do a knife pleat in one direction, you then go out two inches (or twice whatever your pleat width is) and create another pleat in the opposite direction. This means that the open portion of the two pleats should be facing each other. This slightly changes the math. You will then multiply the (amount of fabric you need to end up with) x (The full amount of fabric used by the pleat ie the amount of the pleat x6).
1 1/2 glasses. While the sewing is easy figuring out that math without the project in front of me (I was doing it in my head before I actually started the post) was kind of frustrating…and y’know wine is good 🙂
I hope that these three techniques help you to make beautiful projects! I would LOVE to see what you make with these techniques! Keep Crafting!